Views: 75 Author: Site Editor Publish Time: 2022-07-05 Origin: Site
With the rapid development of LED lighting technology, there are more and more applications of LED outdoors. So what are the relevant specifications of the Led Strip Light? Let's take a look at it next.
Here is the content:
l Brightness Specifications
l Chroma Specifications
l Voltage specification
l Wavelength Specifications
Brightness is an important indicator in the design of Led Strip Light. Only if it meets the brightness indicator can it be regarded as a qualified development. Therefore, the LED brightness file that meets the brightness indicator is set as the lowest brightness file. Of course, this also needs to be combined with the brightness output of the LED manufacturer.
The color temperature requirements for Led Strip Light in the module design are 9 000~12 000 K. If the color block span is too large, it will easily exceed the color temperature range of the module. If the color span is too small, the LED manufacturer cannot meet the delivery requirements, so the choice of color blocks must be to meet these two needs at the same time. In the module development stage, the module color temperature of the limit color point of the color block should be determined. The limit color point of the color block should meet the color temperature range. Other non-limit color point LEDs must meet the color temperature requirements. Therefore, in the development process of Led Strip Light, it is extremely important to test the limit color block chromaticity point corresponding to the value color temperature point.
The driving method of LED is constant current driving, so when determining the solution, the voltage of Led Strip Light is an important factor affecting the overall power. Likewise, power affects energy efficiency. After the solution is determined, the test is carried out according to the energy efficiency definition of the product, and the voltage level that meets the energy efficiency requirements is set as the highest voltage level. However, the voltage level should not be too low. If the voltage is too low, it will have a great impact on the setting of the constant current. Usually, the lowest voltage level of the LED is positioned at 2.8 V.
The selection of the wavelength of Led Strip Light is related to the spectrum of the glass used in the module. The spectrum range of LEDs usually used in backlights is (440~460) nm. The wavelength is an important factor affecting the Big. The above specifications of Led Strip Light are all singles in the straight-down module, otherwise, the module will have chromaticity, brightness, and color unevenness. As the basis for strict control of incoming LED materials, the mixing table lays a good foundation for the smooth progress of R&D and production.
Guangzhou Best show Lighting Co., Ltd is a high-tech led lighting factory with 10000 square meters, located in Guangzhou, China; was founded in 2009 and owns 11 years of production experience; it is dedicated to R&D, production, marketing, and customer service. The above is the relevant content about the relevant specifications of Led Strip Light, if you are interested in Led Strip Light, you can contact us. Our website is https://www.bestshowled.com/. I look forward to your arrival very much and hope to cooperate with you.
English
